XJ (X308) V8-4.0L SC (2003)
Front Door Latch: Service and Repair
Driver Door Lock Mechanism
DRIVER DOOR LOCK MECHANISM
Removal
1. Remove battery cover and disconnect ground cable from battery terminal.
2. Remove driver door casing. See: Service and Repair
3. Position water shedder for access and feed door harness through water shedder.
4. Carefully remove water shedder from door and place adhesive side down on a clean dry plastic sheet.
5. Release door lock actuator harness multiplug from mounting bracket and disconnect multiplug.
6. Position plastic inner sheet for access.