XJ (X308) V8-4.0L SC (2003)
/v8-4.0l_sc/Page-1356001.png)
Front Cross-Member: Description and Operation
Front Crossbeam
A fully stressed, pressed steel and tube fabrication with integral lower wishbone tie bars, the crossbeam is secured to the body on four resilient
mountings.
The crossbeam incorporates mounting points for:
^
The upper and lower wishbone fulcrum bolts.
^
The stabilizer bar
^
The power steering rack.
^
The engine hydramounts.
^
Road springs.
Slots and cam reaction plates on the crossbeam provide for adjustment of suspension geometry.
