XJ (X308) V8-4.0L SC (2003)
32. Install brake calipers.
1. Install caliper on carrier.
2. Install guide pins.
3. Install guide pin dust caps.
4. Install caliper spring clip.
-
Repeat procedure to install opposite side front brake caliper.
33. Install both front road springs.
34. Using screws or new scrivets, secure undertray to front bumper cover.
35. Using new tiestrap, secure undertray to crossbeam brace.
36. Install generator cooling duct deflector.
-
Position deflector over rear vertical duct.
-
Slide deflector forward to engage center tang over undertray.
-
Install bolt and tighten to 17-23 Nm.