XJ (X308) V8-4.0L SC (2003)
-
Position tool in road spring and pass upper dowel through slot in suspension turret.
16. Lower front of vehicle.
17. Rotate stem of special tool 204-114 to locate dowel in suspension turret slot.
18. Lower front of vehicle.
19. WARNING: WHEN TIGHTENING TOOL NUT, USE LOWER DOWEL AS A GUIDE TO ENSURE THAT THE TOOL STEM DOES
NOT ROTATE AND DISTURB POSITION OF DOWEL IN SUSPENSION TURRET.
Tighten nut of special tool 204-114 to full extent, to achieve suspension mid-laden position.
20. Raise front of vehicle and support on stands.
21. Remove front road wheels.
22. Remove crossbeam to engine Hydramount securing bolts.
-
Remove bolt securing crossbeam to Hydramount.
-
Fully withdraw bolt into crossbeam insert.
-
Repeat procedure to remove and withdraw bolt on opposite side.
23. Remove lower nut and bolt from front shock absorber.
-
Repeat procedure to remove bolt from opposite side shock absorber.