XJ (X308) V8-4.0L SC (2003)
Brake Rotor/Disc: Testing and Inspection
Rear
Standard Brakes
Brake Disc Run Out - Check
Special Service tools
Dial Test Indicator Gauge and Stand.
1. Raise rear of vehicle and support on stands.
2. Remove wheel.
3. CAUTION: Tie caliper housing aside. Do not allow the caliper housing to hang on the hydraulic hose, as this will damage the hose.
Remove caliper housing from caliper carrier.
1. Remove anti-rattle spring.
2. Remove dust covers.
3. Remove guide pins.
4. Remove housing from carrier.
^
Tie caliper housing aside.
4. NOTE: Measurement of the brake disc run-out, must be carried-out with the disc and hub parking-brake adjuster-holes aligned.
Make sure that wheel bearing end-float is correct.