2003 XJ (X308) V8-40L SC Compressor HVAC Component Service and Repair
-
Pour oil from compressor into a suitable measuring container. Note amount and discard the oil.
-
Install blanking plugs to compressor.
Installation
1. Fill new compressor with correct amount of oil.
-
Remove blanking plugs from compressor.
-
Pour oil from compressor into a suitable container.
-
Fill compressor with the same amount of oil that was removed from original compressor plus amount recovered from recovery equipment.
-
Install blanking plugs to compressor.
2. Install compressor.
-
Tighten fixings.
3. Install lines to compressor.
-
Install new O-ring seal and lubricate with clean compressor oil.