XJ (X308) V8-4.0L SC (2003)
5. Connect condenser to receiver/drier line at receiver/drier.
-
Remove blanking plugs.
-
Install new O-ring seal and lubricate with clean A/C compressor oil.
-
Connect hose.
-
Install bolt (8 - 10 Nm).
6. Connect compressor to condenser discharge line at condenser.
-
Remove blanking plugs.
-
Install new O-ring seal and lubricate with clean A/C compressor oil.
-
Connect hose.
-
Install bolt (8 - 10 Nm).