XJ (X308) V8-4.0L SC (2003)
/v8-4.0l_sc/Page-302032.png)
16. Install hub on axle shaft .
^
Route handbrake cable through hub carrier.
^
Apply Loctite 270 to axle shaft splines and thread, and fully seat hub on shaft.
17. Install locating collar and hub nut on axle shaft, but DO NOT tighten hub nut.
18. Tighten pivot pin nut.
^
Align marker on pivot pin flange with mark made on wishbone.
^
Ensuring pin position is not disturbed, tighten nut to 88-118 Nm.
