XJ (X308) V8-4.0L SC (2003)
Electronic Noise Suppressor: Service and Repair
Removal
1. Disconnect the battery ground cable.
Remove the battery cover.
2. Raise the vehicle on a ramp.
3. Remove the suppression module.
1. Disconnect the multi-plug from the mounting bracket clip.
2. Disconnect the multi-plug.
3. Remove the bolts which secure the suppression module to the mounting bracket.
4. Remove the suppression module.
Installation
1. Installation is the reverse of the removal procedure.
2. Reconnect the battery ground cable and fit the battery cover. Reset the radio information and the clock.