XJ (X308) V8-4.0L SC (2003)
10. Remove the MAP sensor.
Installation
1. To install, reverse the removal procedure.
-
Tighten to 10 Nm.
2. NOTE:
-
Left-hand shown, right-hand similar.
-
Tighten to 25 Nm.
10. Remove the MAP sensor.
Installation
1. To install, reverse the removal procedure.
-
Tighten to 10 Nm.
2. NOTE:
-
Left-hand shown, right-hand similar.
-
Tighten to 25 Nm.