XJ (X308) V8-4.0L SC (2003)
/v8-4.0l_sc/Page-698001.png)
Knock Sensor: Service and Repair
Knock Sensor (KS) - Bank 2
Knock Sensor (KS) - Bank 2 (SC)
Removal
1. Remove supercharger.
2. Remove knock sensor from engine.
-
Detach connector and disconnect.
-
Remove knock sensor.
Installation
1. Installation is a reversal of the removal procedure.
2. Tighten sensor to 31 - 41 Nm.
