XJ (X308) V8-4.0L SC (2003)
1. CAUTION:
-
Make sure the arrow on the fuel pump module and the 'SC' marker on the fuel tank are aligned.
-
Make sure no damage occurs to the fuel level float.
NOTE:
-
Install a new O-ring seal to the fuel pump module flange.
-
Take care not to stretch the O-ring seal.
-
Left-hand shown, right-hand similar.
-
Install the fuel pump module.
2. NOTE:
-
Left-hand shown, right-hand similar.
-
Using the special tool, tighten to 70 Nm.
3. NOTE:
-
Left-hand shown, right-hand similar.
-
Connect the fuel pump module electrical connector.
4. NOTE:
-
Left-hand shown, right-hand similar.
-
Attach the fuel pump module electrical connector to the retaining bracket.