XJ (X308) V8-4.0L SC (2003)
/v8-4.0l_sc/Page-543002.png)
-
Disconnect the fuel rail pressure (FRP) sensor vacuum hose.
-
Disconnect the FRP sensor electrical connector.
-
Disconnect the FRP sensor vacuum hose.
2. NOTE:
-
Vehicles with 3.5L or 4.2L engine without supercharger shown, vehicles with supercharger similar.
-
Remove the FRP sensor.
-
Remove and discard the O-ring seals.
Installation
1. Install a new O-ring seals.
-
To install, reverse the removal procedure.
-
Tighten to 5 Nm.
