XJ (X308) V8-4.0L SC (2003)
/v8-4.0l_sc/Page-99001.png)
Cruise Control Switch: Description and Operation
Steering Wheel Switches
Steering Wheel Switches
RESUME Switch
When the RESUME switch is pressed with the vehicle travelling above 43 kph (27 mile/h) with the system in STANDBY mode, the vehicle is allowed
to accelerate until the last set speed is resumed. The RESUME switch will not function if the ignition switch has been cycled or if the vehicle speed is
below 43 kph (27 mile/h).
CANCEL Switch
When the CANCEL switch is pressed with the vehicle travelling above 43 kph (27 mile/h) the system will enter STANDBY mode.
SET Switch
When the SET +/- switch is pressed with the vehicle travelling above 43 kph (27 mile/h) the system allows the vehicle speed to be maintained to ± 1.62
kph (1 mile/h). Pressing the SET +/- switch will increase or decrease the vehicle speed respectively until the switch is released. If the respective switch
is pressed momentarily, the speed will accelerate or decelerate in 1.62 kph (1 mile/h) increments.
