XJ (X308) V8-4.0L SC (2003)
/v8-4.0l_sc/Page-1163018.png)
28. Install locating collar and hub nut on axle shaft, but DO NOT tighten hub nut.
29. Tighten pivot pin nut.
^
Align marker on pivot pin flange with mark made on wishbone.
^
Ensuring pin position is not disturbed, tighten nut to 88-118 Nm.
30. Install wheel speed sensor on hub carrier.
^
Position sensor on hub carrier and install and tighten bolt to 7-10 Nm.
^
Connect wheel speed sensor harness to sensor.
