XJ (X308) V8-4.0L SC (2003)
23. Tighten hub nut to 304-336 Nm.
24. Remove nuts and withdraw special tool (204-195) from hub studs.
25. Install brake disc.
26. Install rear wheel.
27. Remove stands and lower vehicle.
28. Raise vehicle on four-post lift.
29. Route brake LH cable through equalizer.
30. Install cable in connecting clip.
31. Adjust parking brake cable.
32. Lower four-post lift.
33. Apply parking brake.
34. Carry out rear wheel alignment check and adjust as necessary.