XJ (X308) V8-4.0L SC (2003)
/v8-4.0l_sc/Page-919009.png)
31. Remove outer seal and bearing assembly from hub carrier.
^
Using a drift, remove and discard outer seal.
^
Remove and discard outer bearing.
^
Remove bearing spacer.
^
Remove bearing shim.
32. Remove inner seal and bearing from hub carrier.
^
Using a drift, remove and discard inner seal.
^
Remove and discard inner bearing.`
33. Remove inner bearing cup from hub carrier.
^
Position hub carrier on a block of wood.
^
Using a drift, remove and discard inner bearing cup.
