XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-1608004.png)
11.
Note the fitted position of the washers and then remove the rear occupant assistance handle (Illustration 5).
12.
Carefully lower the rear corner of the headlining sufficiently to gain access to the drain tube.
13.
Remove and discard the adhesive tape securing the drain tube to the roof panel.
14.
Reposition the drain tube between the white foam blocks (Illustration 6).
15.
Reposition the headlining to the roof panel, ensuring the drain tube remains between the white foam blocks.
16.
Position the rear occupant assistance handle to the headlining, ensuring the washers are fitted correctly. Install screws and torque to 1.5 Nm (1.11
lbf-ft).
17.
Reposition excess drain tube downwards past parcel shelf edge.
Caution:
When pouring water into the channel, make sure it does not overflow and run over the roof opening panel mechanism into the vehicle cabin.
