XJ (X350) V8-4.2L (2005)
7. Install the brake master cylinder reservoir filler cap.
Additional Procedure to Bleed New Calipers with Integral Park Brake Mechanism
NOTE: Due to the complexity of the fluid path within the integral park brake calipers, it may be difficult to achieve a satisfactory result using the
procedure above when new calipers have been installed.
1. Using the Jaguar approved diagnostic system, put the park brake system into service mode.
2. Remove both rear wheels and tires.
3. Bleed the braking system.
4. Disconnect the parking brake cable.
^
Release the tension.
^
Disconnect the park brake cable.
5. Detach the park brake cable.
1. Release the retaining tangs.
2. Detach the park brake cable.
6. Detach the brake caliper from the anchor bracket.