XJ (X350) V8-4.2L (2005)
6. NOTE: Left-hand shown, right-hand similar.
Remove the brake caliper.
1) Remove and discard the brake caliper retaining bolts.
2) Remove the brake caliper.
Installation
1. CAUTION: If brake fluid comes into contact with the paint work, the affected area must be immediately washed down with cold water.
Install the brake caliper.
^
Install new brake caliper upper retaining bolts.
^
Tighten to 34 Nm.
2. Attach the brake hose.
^
Install new sealing washers.
^
Tighten to 35 Nm.
3. Attach the parking brake cable.