XJ (X350) V8-4.2L (2005)
2. Tighten the exhaust manifold retaining bolts to 25 Nm.
3. NOTE: Engine shown removed for clarity.
Install the right-hand exhaust manifold heat shield/gasket retaining bolt.
^
Tighten to 50 Nm.
4. NOTE: Engine shown removed for clarity.
Attach the EGR valve.
^
Install new retaining nuts and a new gasket.
^
Tighten to 22 Nm.
5. Connect the AIR control valve to exhaust manifold tube.
^
Tighten to 35 Nm.