XJ (X350) V8-4.2L (2005)
Air Door Actuator / Motor: Service and Repair
Cold Air Bypass Blend Door Actuator LH
Cold Air Bypass Blend Door Actuator LH
Removal
All vehicles
1. Disconnect the battery ground cable.
Left-hand drive vehicles
1. Remove the front footwell duct LH.
2. Remove the remote climate control module.
-
Disconnect the electrical connectors.
-
Remove the lower retaining screws.
-
Loosen but do not remove the upper retaining screw.
-
Remove the remote climate control module.
3. Remove the cold air bypass blend door actuator.
-
Disconnect the electrical connector.
-
Remove the cold air bypass blend door actuator.
Installation
Left-hand drive vehicles
1. To install, reverse the removal procedure.
NOTE: Care should be taken to ensure the actuator linkages are correctly engaged.