XJ (X350) V8-4.2L (2005)
43.
Set blower to a minimum of 75% of the maximum blower performance.
44.
Set control panel to auto low or maximum or maximum cooling performance.
45.
Start engine and allow the engine speed to stabilize.
46.
With the A/C 'ON', allow the engine to run for two minutes continuously at compressor speed less than 1800 rpm.
Note:
Refer to manufacturer's guidelines for detailed information on flushing equipment maintenance and filter change.
47.
After two minutes of compressor operation, the oil distribution in the A/C system is finalized.
Global Technical Reference (GTR) Workshop Manual Information:
Internet access: http://www.jaguartechinfo.com
Parts Information
Warranty Information
Disclaimer