XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-616001.png)
Intake Air Temperature Sensor: Service and Repair
Intake Air Temperature (IAT) Sensor - Vehicles With: Supercharger (18.30.52)
Removal
1. Remove the engine cover.
2. Disconnect the intake air temperature (IAT) sensor electrical connector.
3. Remove the IAT sensor.
-
Remove and discard the IAT sensor sealing washer.
Installation
1. To install, reverse the removal procedure.
-
Install a new IAT sensor sealing washer.
-
Tighten to 35 Nm.
