XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-829004.png)
NOTE: Cap the coolant hose to minimize coolant loss.
9. Remove the throttle body.
-
Disconnect the coolant hose.
10. Remove and discard the gasket.
Installation
CAUTION: Do not attempt to clean the throttle body. The bore and the throttle plate has a special coating applied during manufacture which should not
be removed.
1. To install, reverse the removal procedure.
-
Install a new gasket.
2. Tighten to 10 Nm.
