XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-122001.png)
Wheel Speed Sensor: Service and Repair
Rear
Rear Wheel Speed Sensor (70.60.04)
Removal
1. Raise and support the vehicle. Refer to Maintenance/Service and Repair.
2. CAUTION: Make sure the ignition is in the 'OFF' position before disconnecting the rear wheel speed sensor electrical connector.
Disconnect the rear wheel speed sensor electrical connector.
3. Remove the rear wheel speed sensor.
^
Remove the securing bolt.
Installation
1. To install, reverse the removal procedure.
^
Tighten to 9 Nm.
