XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-1131003.png)
5. Check the camber and toe settings. Follow the equipment manufacturers instructions. Adjust as necessary.
6. NOTE: Make sure the camber adjustment cam bolt does not rotate.
NOTE: Left-hand shown, right-hand similar.
Tighten the rear lower arm lock nut.
Tighten to 175 Nm.
7. NOTE: Make sure the be-rod does not rotate.
NOTE: Left-hand shown, right-hand similar.
Tighten the tie-rod end lock nut
Tighten to 100 Nm.
