XJ (X350) V8-4.2L (2005)
CAUTION:
This procedure requires IDS DVD109 with Patch file 3 or later and the Midtronics PSC-550 Vehicle Power Supply connected to the vehicle
battery during diagnosis.
1.
Connect a Midtronics PSC-550 Vehicle Power Supply to the vehicle.
2.
Connect IDS to the vehicle and begin a new diagnostic session, by entering the correct VIN for the current vehicle.
3.
Select the 'Vehicle Configuration' tab.
4.
Select from the menu 'Set-up and Configuration'.
5.
Press 'tick' to continue.
6.
Select 'Air Suspension', then 'Air Suspension Transportation/customer mode' from the menu.
7.
Press 'tick' to continue.
8.
Select 'Customer Mode'.
9.
Press 'tick' to continue.
10.
Follow all on-screen instructions to complete this task.
11.
When the task is completed, exit the current session.
12.
Disconnect IDS and the battery charger/power supply.
13.
Install reservoir and valve block cover.
14.
Install spare wheel.
15.
Install the spare wheel/tool compartment cover.
16.
Close the luggage compartment lid.