XJ (X350) V8-4.2L SC (2004)
Rear Door Window Regulator: Removal and Replacement
Rear Door Window Regulator and Motor
Removal
1. Remove the rear door trim panel.
2. Detach the rear door wiring harness.
-
Disconnect the rear door speaker electrical connector.
3. Detach the rear door wiring harness grommet.
4. Remove the rear door inner weather-shield retaining screw covers.
5. Remove the rear door inner weather-shield.
6. Power the rear door window glass to its fully open position.
7. Undo the rear door window glass retaining bolt.