XJ (X350) V8-4.2L SC (2004)
/v8-4.2l_sc/Page-1574007.png)
5. Remove the special tool.
6. Install a new front subframe front retaining bolt.
-
Stage 1: Tighten to 100 Nm.
-
Stage 2: Tighten 270 degrees.
7. Remove the special tool.
8. Install a new front subframe front retaining bolt.
-
Stage 1: Tighten to 100 Nm.
-
Stage 2: Tighten 270 degrees.
9. Remove the special tool.
10. NOTE: Left-hand shown, right-hand similar.
