XJ (X350) V8-4.2L SC (2004)
/v8-4.2l_sc/Page-1593001.png)
Scuff Plate: Service and Repair
Rocker Panel Moulding
Rocker Panel Moulding
Removal
1. Remove the rocker panel moulding front retaining screws.
NOTE: Left-hand shown, right-hand similar.
2. Remove the rocker panel moulding rear retaining screw.
NOTE: Left-hand shown, right-hand similar.
3. Remove the rocker panel moulding lower retaining fixings.
NOTE: Left-hand shown, right-hand similar.
4. Remove the rocker panel moulding.
NOTE: Left-hand shown, right-hand similar.
Installation
