XJ (X350) V8-4.2L SC (2004)
Trunk / Liftgate Lock Cylinder: All Technical Service Bulletins
Locks - Trunk Opens with Valet Key
XJ501-06
XJ Range
DATE 11/03
MODEL
2004 MY
XJ Range
VIN
G15000-G20728
Valet Key Opens Trunk - Incorrect Lock Cylinder- Repair Procedure
ISSUE:
A small number of 2004 MY XJ range vehicles within the above VIN range, may have an incorrect luggage compartment lock installed, which will
permit access with the 'valet' key Should a customer express concern, a new lock should be installed.
Action:
Note:
When carrying out key and lock checks during PDI please ensure that valet key operation is checked to ensure customer satisfaction.
In case of a customer complaint of the above condition on a 2004 MY XJ range, install a new lock cylinder (see Workshop Manual, JTIS CD ROM,
section: 501-14, SRO 76.19.19).
Parts Information:
Note:
Do not replace the entire vehicle lock set. When ordering a new luggage compartment lock, the original key number MUST be provided. If the
original key number is not supplied, the order will be cancelled without notification.
DESCRIPTION
PART NUMBER
QTY
Luggage
C2C 2901
1
compartment lock
Warranty Information:
Warranty claims should be submitted quoting the information found in the table.
This will result in payment of the stated time and, where applicable parts/miscellaneous expense codes as listed.