XJ (X350) V8-4.2L SC (2004)
/v8-4.2l_sc/Page-1690003.png)
10. Remove and discard the front seat backrest cover retaining clips.
11. Remove the front seat backrest cover.
Installation
1. NOTE: Install new front seat backrest cover retaining clips.
To install, reverse the removal procedure.
-
Tighten to 7 Nm.
Front Seat Backrest Cover - VIN Range: H18680->H99999
Front Seat Backrest Cover - VIN Range: H18680->H99999
Removal
1. WARNING:
-
A restraints control module (RCM) only requires replacement if the system has incurred five separate deployments. At no time
change the RCM for less than five separate deployments.
-
Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag
module. Failure to follow this instruction may result in personal injury.
-
Carry a live air bag module with the air bag and trim cover pointed away from your body. This will reduce the risk of injury in the
event of an accidental deployment. Failure to follow this instruction may result in personal injury.
-
Do not set a live air bag module down with the trim cover face down. Failure to follow this instruction may result in personal injury.
-
After deployment, the air bag surface can contain deposits of sodium hydroxide, a product of the gas generant combustion that is
