XJ (X350) V8-4.2L SC (2004)
/v8-4.2l_sc/Page-1008001.png)
Brake Pedal Assy: Service and Repair
Brake Pedal Travel Sensor - VIN Range: G00442->G49700
Removal
WARNING: Failure to carry out procedure may result in damage to the vehicle.
1. Depress brake pedal 20 times to remove vacuum from brake booster.
2. Remove the brake pedal travel sensor.
^
Disconnect the brake pedal travel sensor electrical connector.
^
Using a suitable pick, remove the spring clip.
Installation
1. Fit new spring clip to sensor housing, ensuring correct alignment.
2. Lubricate new seal with water and fit seal to the sensor.
3. Fit and fully seat new brake pedal travel sensor.
^
Connect the brake pedal travel sensor electrical connector.
