XJ (X350) V8-4.2L SC (2004)
/v8-4.2l_sc/Page-1050002.png)
8. Install the special tool to support the rear subframe.
9. NOTE: Left-hand shown, right-hand similar.
Remove the noise, vibration and harshness brace retaining bolts.
10. NOTE: Left-hand shown, right-hand similar.
Remove and discard the rear subframe rear retaining bolts.
11. NOTE: Left-hand shown, right-hand similar.
Remove the noise, vibration and harshness brace.
^
Remove and discard the rear subframe front retaining bolts.
12. Lower the subframe to a maximum of 60 mm.
