XJ (X350) V8-4.2L SC (2004)
/v8-4.2l_sc/Page-365001.png)
Crankshaft: Specifications
Cylinder Block
CAUTION: Make sure all dowels are fully seated into lower cylinder block prior to tightening the bolts.
CAUTION: Do not lubricate the lower cylinder block bolts.
CAUTION: Do not rotate crankshaft until all bolts are tightened to specification.
CAUTION: Bolts must be tightened within twenty minutes of applying sealer.
CAUTION: Tighten the bolts in the sequence shown.
Install the lower cylinder block to the upper cylinder block.
Tighten bolts 21 to ................................................................................................................................................................................. 32 to 15 Nm
Tighten bolts 33 to ................................................................................................................................................................................. 34 to 15 Nm
Tighten bolts 1 to ................................................................................................................................................................................... 10 to 25 Nm
Tighten bolts 11 to .................................................................................................................................................................................. 20 to 15 Nm
Tighten bolts 1 to ........................................................................................................................................................................ 10 to 35 Nm + 135°
Tighten bolts 11 to ..................................................................................................................................................................... 20 to 2O Nm + 150°
Tighten bolts 21 to ........................................................................................................................................................................ 32 to 20 Nm + 90°
Tighten bolts 33 to ....................................................................................................................................................................... 34 to 20 Nm + 150°
