XJ (X350) V8-4.2L SC (2004)
9. Remove the supercharger belt idler pulley.
Installation
1. To install, reverse the removal procedure.
^
Tighten to 40 Nm.
2. Tighten to 9 Nm.
3. Tighten to 10 Nm + 45°.
9. Remove the supercharger belt idler pulley.
Installation
1. To install, reverse the removal procedure.
^
Tighten to 40 Nm.
2. Tighten to 9 Nm.
3. Tighten to 10 Nm + 45°.