XJ (X350) V8-4.2L SC (2004)
/v8-4.2l_sc/Page-420010.png)
25. Install the left-hand variable camshaft timing oil control unit housing.
^
Install new O-ring seals.
^
Tighten to 22 Nm.
26. Install the right-hand variable camshaft timing oil control unit housing.
^
Install new O-ring seals.
^
Tighten to 22 Nm.
27. Install the engine front cover.
28. Remove the special tool.
29. Install the CKP sensor.
^
Tighten to 10 Nm.
30. Connect the CKP sensor electrical connector.
