XJ (X350) V8-4.2L SC (2004)
7. Remove the blower motor housing.
8. Remove the footwell vent/duct blend door actuator.
-
Disconnect the electrical connector.
-
Remove the footwell vent/duct blend door actuator.
Installation
Left-hand drive vehicles
1. To install, reverse the removal procedure.
-
Tighten to 7 Nm.
NOTE: Care should be taken to ensure the actuator linkages are correctly engaged.
2. Tighten to 7 Nm.
Recirculation Blend Door Actuator
82.20.67
Recirculation Blend Door Actuator
Removal
1. Remove the passenger footwell vent duct.