XJ (X350) V8-4.2L SC (2004)
/v8-4.2l_sc/Page-878003.png)
2. Install the new seals.
3. Install the TCM and main control valve body sealing block.
4. CAUTION: Make sure the TCM and main control valve body are protected against electrostatic discharge. Failure to follow this instruction may
result in component damage.
Align the transmission selector shaft to the TCM and main control valve body.
5. Install the TCM and main control valve body retaining bolts.
^
Tighten to 8 Nm.
6. Install the new seals.
