XJ (X350) V8-4.2L SC (2004)
/v8-4.2l_sc/Page-936003.png)
2. Attach the transmission selector lever.
^
Tighten to 11 Nm.
3. NOTE: Shown with the electric parking brake switch removed for clarity.
Connect the electrical connector.
4. NOTE: Fully extend the selector cable, then retract the selector cable one detent.
Make sure the selector lever cable is in the "R" position.
5. Make sure the transmission selector lever is in the "R" position.
6. Attach the selector lever cable.
7. Loosen the selector lever cable lock nuts.
