XJ (X350) V8-4.2L SC (2004)
9. Remove the lifting handles.
10. NOTE: Make sure the windshield glass does not move out of position in the windshield glass aperture.
Apply suitable adhesive tape to the top of the rear window glass.
11. Remove the protective tape around the rear rear window glass aperture.
12. Remove protective tape from rear edge of headliner.
13. CAUTION: Do not connect the electrical connectors for at least 1 hour after installation of the windshield glass. Failure to follow these
instructions may result in damage to the rear window glass adhesive.
NOTE: Right-hand shown, left-hand similar.
Connect the electrical connector.
14. CAUTION: Do not connect the electrical connectors for at least 1 hour after installation of the windshield glass. Failure to follow these