XJR (X300) L6-4.0L SC (AJ16) (1995)
Vacuum Pump: Service and Repair
VACUUM PUMP
-
Open the bonnet and fit wing protection.
-
Disconnect the vacuum pump harness multi-plug (1 Fig. 1).
-
Disconnect the vacuum hose (2 Fig. 1) from the vacuum pump.
-
Remove the vacuum pump mounting screws (3 Fig. 1).
-
Displace and remove the vacuum pump (4 Fig. 1).
-
Fit and align the replacement vacuum pump to mounting position.
-
Fit and tighten vacuum pump securing screws.
-
Connect vacuum pump harness multi-plug.
-
Connect vacuum hose.
-
Remove wing covers and close bonnet.