XJR (X300) L6-4.0L SC (AJ16) (1995)
Front Door Interior Handle: Service and Repair
Fig. 1
-
Remove door veneer panel.
-
Remove door upper trim pad.
-
Remove door lower trim pad.
-
Using a suitable plastic knife, cut through the weather- shield to door sealant and reposition weathershield for access.
-
Reposition lock assembly multi-plug from mounting bracket and undo and remove door glass lower fixings.
-
Reposition the glass frame and remove the outer cable to lock assembly securing clip.
-
Displace cable from abutment bracket.
-
Disconnect inner cable from lock assembly and interior door handle.
-
Disconnect the outer cable from the interior handle assembly and remove securing sleeve from cable.
-
Remove operating cable assembly (Fig.1).
Refit in the reverse order of the removal procedure.
NOTE: Fig.1 shows front door components only.