XJR (X300) L6-4.0L SC (AJ16) (1995)
Sunroof / Moonroof Windguard: Service and Repair
SLIDING ROOF FLANGE FINISHER:
-
Remove sliding roof trim panel for access.
-
Switch ignition on, open sliding roof.
-
Switch ignition off.
-
Carefully remove sliding roof aperture trim finisher (1) from flange.
NOTE: Do not damage the headlining trim edges (2).
-
Displace and remove headlining clips from finisher, place finisher aside.
Refit in the reverse order of removal procedure.