XJR (X300) L6-4.0L SC (AJ16) (1995)
Mirror Movement Motor Position Potentiometers, Fig.1
13.
Mirror movement switches
a. Examine harness wiring, checking continue between C/M CM multi-pin connector and drivers door switch pack connector as follows:
C/M CM
Function
Switch Pack
Connector block A
6
Passenger mirror U/D
Pin 12
7
Driver mirror U/D
Pin 02
8
Passenger mirror R/L
Pin 13
9
Driver mirror R/L
Pin 03
10
Common
Pin 01
b. Check operation of switch as follows:
Select driver's mirror and operate joystick up and down7 checking that voltage on common line toggles between ground and +12V and that
voltage on driver's mirror U/D line toggles in opposition.e.e when common = +12V, driver U/D = ground and vice versa. Repeat test
moving joystick left and right and monitoring common line against driver R/L line; the same results should be achieved. Select passenger
mirror and repeat both tests on passenger mirror lines.