XJR (X300) L6-4.0L SC (AJ16) (1995)
Power Seat Switch: Service and Repair
Power Seat Switch Assembly
Power Seat Switch Assembly Fig. 1
All vehicles are equipped with two switch assemblies which are clipped in outboard positions of driver's and front passenger seats. The assembly for
vehicles fitted with non-manual seats comprises three switches which control the following movements:
-
Forward/rearward seat movement (3 Fig. 1).
-
Forward/rearward squab movement (1 Fig. 1).
-
Front and rear cushion movement (3 Fig. 2).
-
Up/down headrest movement (1 Fig. 1).
-
Inflation/deflation of lumbar cushion (2 Fig. 1).
On cars equipped with manual seats, a seat height switch pack assembly accommodating a single switch is fitted only on the driver's seat in a similar
position as the switch item 3 Fig. 1.
NOTE: Note orientation of switch pack assembly and remove carefully.