XJR (X300) L6-4.0L SC (AJ16) (1995)
-
Remove the adapter casting from the timing cover and discard it.
-
Clean all the joint faces.
-
Position a new adapter casting on the timing cover. Fit and tighten the bolts securing the adapter casting to the timing cover.
-
Follow the procedure for renewing the tensioner bracket after the fitting of the new adapter casting.
Supercharger Belt, Idler Pulley
SUPERCHARGER DRIVE BELT IDLER PULLEY, RENEW
-
Raise the vehicle on a ramp.
-
Remove the supercharger drive belt.
-
Remove the bolt (3 Fig. 1) securing the drive belt idler pulley to the mounting casting.
-
Remove and discard the idler pulley.
Refit in the reverse order of the removal procedure.