XJR (X300) L6-4.0L SC (AJ16) (1995)
Fig. 2
-
Remove fuel rail assembly (1 Fig. 2) from manifold.
-
Fit blanking plugs to manifold.
-
Drain the residual fuel from the fuel rail into a suitable drain tin.
-
Remove the injector retaining clips (2 Fig. 2).
-
Remove injectors (3 Fig. 2).
-
Disconnect vacuum hose from regulator.
-
Remove regulator mounting bracket.
-
Undo fuel rail to regulator union nut.
-
Remove regulator assembly.
Refit in the reverse order of the removal procedure.