XJR (X300) L6-4.0L SC (AJ16) (1995)
Fuel Return Line: All Technical Service Bulletins
Fuel Tank Pipe Seals - Replacement Procedure
05.1-03
DATE:
8/95
Sedan Range
MODEL:
1995 MY
Sedan (4.0L) Range
VIN:
720001-ON
Fuel Tank Pipe Seals - Replacement Procedure
ISSUE:
Replacement seals for the fuel supply or return pipe connections at the fuel tank are supplied as a kit. The seal kit (part number EBC 9606) includes the
required seals and spacers mounted on a disposable "stuffer pin." The "stuffer pin" is used to insert the seals into the fuel pipe connector bore.
ACTION:
To replace the seals for the fuel supply or return pipe connections at the fuel tank, follow the procedure described below.
NOTE:
It is not required to replace the seals each time the a fuel pipe is disconnected. Change the fuel tank supply or return pipe connection seals in the
event of fuel leaks only.
FUEL TANK PIPE SEAL REPLACEMENT PROCEDURE
1.
Depressurize and drain the fuel tank following the instructions in the applicable service manual.
2.
Thoroughly clean the fuel tank pipe, tank connector and the surrounding area.